This content is password protected. To view it please enter your password below:
This is an old roof system from 2004.
The installation appears to be correct and there is no visible damage to the covering materials.
Since the system is nearing the end of its useful service life, we recommend:
Over 25% of the homes we inspect are reported to be missing smoke detectors.
A double tapped breaker is two (or more) conductors connected to one terminal on the same circuit breaker.
1. Definitions and Scope
2. Limitations, Exceptions & Exclusions
3. Standards of Practice
3.3. Basement, Foundation, Crawlspace & Structure
3.9. Attic, Insulation & Ventilation
3.10. Doors, Windows & Interior
4. Glossary of Terms
1.1. A home inspection is a non-invasive, visual examination of the accessible areas of a residential property (as delineated below), performed for a fee, which is designed to identify defects within specific systems and components defined by these Standards that are both observed and deemed material by the inspector. The scope of work may be modified by the Client and Inspector prior to the inspection process.
1.2. A material defect is a specific issue with a system or component of a residential property that may have a significant, adverse impact on the value of the property, or that poses an unreasonable risk to people. The fact that a system or component is near, at, or beyond the end of its normal, useful life is not, in itself, a material defect.
1.3. Ahome inspection report shall identify, in written format, defects within specific systems and components defined by these Standards that are both observed and deemed material by the inspector. Inspection reports may include additional comments and recommendations.